碳殘陽極
(Carbon Anode Scrap)
Product Description:
The carbon anode is used for a cycle in the electrode aluminum, Then the remnant is called the carbon anoed scrap (Another name:anode butts).
According to the different requirements of customers, producing all kinds of special specification products to meet customer needs after the anode scrap is cleaned 、
broken and screened by workers.
We shall loaded up carbon anode scrap not only from China but also Malasia and Iran, Because our company has supply the carbon anode to electrolytic aluminum factory
of these above countries. Usually we buy back the carbon anode scrap as one of the additional conditions, Of course we know well the quality of these carbon anode
scrap, include physical and chemical indicators of these butts.
中文名:殘陽極。
簡 介:陽極電解週期終了時的殘餘部分。
過 程:電解精煉。
作 用:可熔化再鑄成陽極。
一般說來,殘陽極出槽後,剝除和洗淨其上的陽極泥,即可熔化再鑄成陽極。有的殘陽極還可另作他用,例如,銅殘陽極可作為冷料加入轉爐,也可用作製造硫酸銅的原料;鎳殘陽極可用於製造補充鎳離子的電解液。
電解精煉過程中,陽極電解週期終了時的殘餘部分。一般說來,殘陽極出槽後,剝除和洗淨其上的陽極泥,即可熔化再鑄成陽極。有的殘陽極還可另作他用.例如,銅殘陽極可作為冷料加入轉爐,也可用作製造硫酸銅的原料;鎳殘陽極可用於製造補充鎳離子的電解液。
另外,殘陽極碳塊和煤,用來熔煉料(銅和鋁)的時候,殘陽極碳塊相對於煤能節約多少。具體的比較殘陽極碳塊可燃燒12-14小時。煤只能燒4個小時左右
什麼是廢殘極?殘極有什麼特點和用途?
1、極是因為長期與電解質接觸,含有較高的電解質成分,如鋁、鈉、鉀、鈣、鎂、鋰、氟等成分。
2、殘極表往往附有電解質所形成的硬殼。
3、殘極熱值高,乾燥無水分,1噸殘極相當於1.5噸冶金焦。
4、殘極產量一般是陽極炭塊量的15%~50%。
5、殘極質量指標:水分:3%,灰分:1%,揮發分:1%,全硫1.2%,固定碳98%發熱量8000-9000大卡。
6、殘極用途:極經過清理可在陽極材料生產過程中重新利用。在陽極炭塊或陽極糊生產配料時,作為一種骨料加入,殘極也可用作冶煉燃料,特別用於化銅化鋁等高融點金屬,做燃料使用需做環保處理。
7、殘極規格:分別有1-3公分塊,3-8公分塊,8-20公分塊,及20公分以上的手搬塊。
The carbon anode is used for a cycle in the electrode aluminum, Then the remnant is called the carbon anoed scrap (Another name:anode butts).
According to the different requirements of customers, producing all kinds of special specification products to meet customer needs after the anode scrap is cleaned 、
broken and screened by workers.
We shall loaded up carbon anode scrap not only from China but also Malasia and Iran, Because our company has supply the carbon anode to electrolytic aluminum factory
of these above countries. Usually we buy back the carbon anode scrap as one of the additional conditions, Of course we know well the quality of these carbon anode
scrap, include physical and chemical indicators of these butts.
中文名:殘陽極。
簡 介:陽極電解週期終了時的殘餘部分。
過 程:電解精煉。
作 用:可熔化再鑄成陽極。
一般說來,殘陽極出槽後,剝除和洗淨其上的陽極泥,即可熔化再鑄成陽極。有的殘陽極還可另作他用,例如,銅殘陽極可作為冷料加入轉爐,也可用作製造硫酸銅的原料;鎳殘陽極可用於製造補充鎳離子的電解液。
電解精煉過程中,陽極電解週期終了時的殘餘部分。一般說來,殘陽極出槽後,剝除和洗淨其上的陽極泥,即可熔化再鑄成陽極。有的殘陽極還可另作他用.例如,銅殘陽極可作為冷料加入轉爐,也可用作製造硫酸銅的原料;鎳殘陽極可用於製造補充鎳離子的電解液。
另外,殘陽極碳塊和煤,用來熔煉料(銅和鋁)的時候,殘陽極碳塊相對於煤能節約多少。具體的比較殘陽極碳塊可燃燒12-14小時。煤只能燒4個小時左右
什麼是廢殘極?殘極有什麼特點和用途?
1、極是因為長期與電解質接觸,含有較高的電解質成分,如鋁、鈉、鉀、鈣、鎂、鋰、氟等成分。
2、殘極表往往附有電解質所形成的硬殼。
3、殘極熱值高,乾燥無水分,1噸殘極相當於1.5噸冶金焦。
4、殘極產量一般是陽極炭塊量的15%~50%。
5、殘極質量指標:水分:3%,灰分:1%,揮發分:1%,全硫1.2%,固定碳98%發熱量8000-9000大卡。
6、殘極用途:極經過清理可在陽極材料生產過程中重新利用。在陽極炭塊或陽極糊生產配料時,作為一種骨料加入,殘極也可用作冶煉燃料,特別用於化銅化鋁等高融點金屬,做燃料使用需做環保處理。
7、殘極規格:分別有1-3公分塊,3-8公分塊,8-20公分塊,及20公分以上的手搬塊。
Copyright © 2014-18 NCM CORP-CPMG Mining International Enterprise All rights reserved.